Skip to Content

Compare the complete ordering code

Cyclone V E FPGAs

Cyclone V E is the FPGA-fabric branch of this comparison. The listed 5CEFA5, 5CEFA7 and 5CEFA9 devices differ in logic, memory and DSP resources. They do not include the hard processor system or serial transceivers of the Cyclone V SX devices. Start with the required architecture, then compare the exact package and user I/O.

Copper traces, solder joints and small components on a green circuit board

How should a Cyclone V E density change be evaluated?

Compare implemented logic, memory and DSP needs, then use the device-by-package matrix to check available I/O. A common package code does not establish equal I/O resources across densities. Retarget the project and verify timing, power and pin assignments before treating a larger device as an approved alternative.

How is the ordering code structured?

An ordering code combines the device identity with the fields that define its package, speed, temperature, voltage or packing, depending on the series. The example below shows the field boundaries; read the exact code from the approved BOM before comparing any offer.

5CEFA5F23I7N

Example ordering code from this series

FieldWhat it controls
Device and density5CEFA5, 5CEFA7 and 5CEFA9 select 77K, 150K and 301K nominal logic elements with their corresponding memory and DSP resources.
PackageM13, M15, U19, F23, F27 and F31 are different package codes. Body size, pitch and usable I/O are device-by-package fields.
TemperatureC, I and A select commercial, industrial or automotive junction-temperature ranges. The A code does not by itself establish a full automotive qualification.
Speed6, 7 and 8 are device speed grades. They are not clock-frequency guarantees; timing closure belongs to the design.
OptionN is the lead-free package finish option. Confirm the approved finish and the exact code.

Device characteristics

Cyclone V E 5CEFA5

Device family
Cyclone V E 5CEFA5
Logic elements (nominal)
77K
Adaptive logic modules
29,080
M10K memory
4,460 Kb
MLAB memory
424 Kb
Variable-precision DSP blocks
150
PLLs
6

Cyclone V E 5CEFA7

Device family
Cyclone V E 5CEFA7
Logic elements (nominal)
150K
Adaptive logic modules
56,480
M10K memory
6,860 Kb
MLAB memory
836 Kb
Variable-precision DSP blocks
156
PLLs
7

Cyclone V E 5CEFA9

Device family
Cyclone V E 5CEFA9
Logic elements (nominal)
301K
Adaptive logic modules
113,560
M10K memory
12,200 Kb
MLAB memory
1,717 Kb
Variable-precision DSP blocks
342
PLLs
8

These characteristics describe the device family. Exact package, grade and operating-condition limits are provided on each product page and in the manufacturer documents below.

How does package choice change usable I/O?

The same 484-ball size appears under M13, M15, U19 and F23 codes with different body sizes and pitches. The package I/O count also changes by density; use the device-by-package entry, not the ball count.

PackageOptionsPackage codePins/ballsUser I/OBody sizePitch
UBGA48415U1948422419 × 19 mm0.8 mm
FBGA48411F2348422423 × 23 mm1.0 mm
FBGA6727F2767233627 × 27 mm1.0 mm
FBGA8967F3189648031 × 31 mm1.0 mm
MBGA3834M1338317513 × 13 mm0.5 mm
MBGA4842M1548424015 × 15 mm0.5 mm

Package entries are compiled from the listed ordering codes. Where a device-by-package I/O count is recorded, it appears in the table; a ball or lead count alone does not establish usable I/O or footprint. Confirm the exact package drawing and device pinout.

Complete ordering options

Compare physical package and variant fields, then open an ordering code for its specifications, packing details and RFQ. All 46 options are listed below.

Cyclone V E FPGAs · ordering-code comparison
Ordering codePackageUser I/OSpeed / gradeDC
5CEFA7F31I7NFBGA8964807 / I (Industrial)23+ / 24+
5CEFA9F23I7NFBGA4842247 / I (Industrial)23+
5CEFA5F23I7NFBGA4842407 / I (Industrial)24+
5CEFA5F23C6NFBGA4842406 / C (Commercial)24+
5CEFA5U19I7NUBGA4842247 / I (Industrial)24+
5CEFA5U19A7NUBGA4842247 / A (Automotive)25+
5CEFA5M13C7NMBGA3831757 / C (Commercial)24+
5CEFA5U19C8NUBGA4842248 / C (Commercial)24+
5CEFA5U19C7NUBGA4842247 / C (Commercial)24+
5CEFA5M13I7NMBGA3831757 / I (Industrial)24+
5CEFA5F23C7NFBGA4842407 / C (Commercial)24+
5CEFA5M13C6NMBGA3831756 / C (Commercial)24+
5CEFA5M13C8NMBGA3831758 / C (Commercial)24+
5CEFA5F23C8NFBGA4842408 / C (Commercial)24+
5CEFA5U19C6NUBGA4842246 / C (Commercial)24+
5CEFA7U19A7NUBGA4842407 / A (Automotive)25+
5CEFA7F31C7NFBGA8964807 / C (Commercial)24+
5CEFA7F31C6NFBGA8964806 / C (Commercial)24+
5CEFA7U19I7NUBGA4842407 / I (Industrial)24+
5CEFA7F27I7NFBGA6723367 / I (Industrial)24+
5CEFA7F31C8NFBGA8964808 / C (Commercial)24+
5CEFA7F23I7NFBGA4842407 / I (Industrial)24+
5CEFA7U19C7NUBGA4842407 / C (Commercial)24+
5CEFA7F23C8NFBGA4842408 / C (Commercial)24+
5CEFA7F23C7NFBGA4842407 / C (Commercial)24+
5CEFA7M15I7NMBGA4842407 / I (Industrial)24+
5CEFA7M15C7NMBGA4842407 / C (Commercial)24+
5CEFA7F27C6NFBGA6723366 / C (Commercial)24+
5CEFA7U19C8NUBGA4842408 / C (Commercial)24+
5CEFA7U19C6NUBGA4842406 / C (Commercial)24+
5CEFA7F27C7NFBGA6723367 / C (Commercial)24+
5CEFA7F23C6NFBGA4842406 / C (Commercial)24+
5CEFA7F27C8NFBGA6723368 / C (Commercial)24+
5CEFA7U19I7UBGA4842407 / I (Industrial)23+
5CEFA9F23C7NFBGA4842247 / C (Commercial)24+
5CEFA9F31C7NFBGA8964807 / C (Commercial)24+
5CEFA9F31I7NFBGA8964807 / I (Industrial)24+
5CEFA9F27I7NFBGA6723367 / I (Industrial)24+
5CEFA9U19C7NUBGA4842407 / C (Commercial)24+
5CEFA9F27C8NFBGA6723368 / C (Commercial)24+
5CEFA9F23C8NFBGA4842248 / C (Commercial)24+
5CEFA9F31C8NFBGA8964808 / C (Commercial)24+
5CEFA9U19I7NUBGA4842407 / I (Industrial)24+
5CEFA9F27C7NFBGA6723367 / C (Commercial)24+
5CEFA9U19C8NUBGA4842408 / C (Commercial)24+
5CEFA9U19A7NUBGA4842407 / A (Automotive)25+

Resolve these differences before ordering

DecisionWhat to matchPurchasing consequence
Package and pin assignmentMatch the complete package code to the approved board revision and manufacturer pinout.Equal ball counts alone do not establish footprint or signal compatibility.
Speed and temperatureUse the exact ordered device in implementation and timing analysis, including the required operating range.A different speed or temperature suffix requires engineering review before purchase.
Configuration and toolsRetain the project, constraints, programming image and tool version used to release the board.A component purchase cannot recover missing configuration files or approve a new device target.
E versus SoC architectureDetermine whether the design needs FPGA fabric only or a hard processor and transceivers.Cyclone V E and Cyclone V SX are separate architecture choices, not interchangeable suffixes.
Industrial control console with switches, pushbuttons and a small display
Preserve the released control interface when replacing a fabric-only FPGA.
Technician examining a circuit board through a stereo microscope
Package and assembly review supports the wider engineering decision.

Manufacturer documentation

Engineering and sourcing guidance

Related series to evaluate

These series support adjacent selection tasks. A related listing is not an approved replacement.

ALTERA · 33 ordering options

Cyclone V SX SoC FPGAs

Compare Cyclone V SX 5CSXFC2/4/5/6 devices, HPS and FPGA resources, U23/F31 packages and complete SoC FPGA ordering codes.

ALTERA · 32 ordering options

Cyclone 10 LP FPGAs

Compare 10CL016 and 10CL025 Cyclone 10 LP packages, Y/Z core-voltage options, user I/O and speed/temperature grades.

Ordering questions

Which Cyclone V E densities are covered?

The guide covers 5CEFA5 at 77K nominal logic elements and 29,080 adaptive logic modules, 5CEFA7 at 150K and 56,480, and 5CEFA9 at 301K and 113,560. Memory and DSP resources also scale with the density.

Can a larger density replace a smaller one in the same package?

Not automatically. The package may expose a different user I/O count, and the design must be retargeted and checked for pin assignment, timing, power and thermal behavior before the larger device is approved.

Does Cyclone V E include a hard processor system?

No. Cyclone V E is the FPGA-fabric branch. Cyclone V SX adds a dual-core Arm Cortex-A9 hard processor system and serial transceivers, so the architecture choice must be explicit.

What does the A temperature code mean?

A selects the automotive junction-temperature range in the ordering code. It does not by itself establish AEC-Q qualification or acceptance of the complete system; confirm the part-specific evidence for the application.