Skip to Content

From design requirement to ordering code

Find the right component series

Compare the fields that change a purchasing decision: device resources, package, voltage, channel direction and operating grade. Each series connects manufacturer specifications to complete ordering codes and practical engineering guidance.

Copper traces, solder joints and small components on a green circuit board

Artix-7 and Kintex-7 FPGAs

Compare the released device target, package and timing grade before considering density changes. The FPGA image, board constraints and tool project remain part of the replacement decision.

XILINX · 23 ordering options

Artix-7 XC7A100T

Compare XC7A100T ordering codes, BGA packages, speed and temperature grades. Review Artix-7 device resources and quote an exact part.

XILINX · 23 ordering options

Artix-7 XC7A200T

Compare XC7A200T Artix-7 packages and complete ordering codes, with device resources, migration checks and sourcing requirements.

XILINX · 22 ordering options

Kintex-7 XC7K325T

Review XC7K325T Kintex-7 ordering codes, FBG/FFG package choices, speed grades and interface checks before an RFQ.

XILINX · 17 ordering options

Kintex-7 XC7K410T

Compare XC7K410T Kintex-7 ordering options and packages. Review DSP, memory, thermal and configuration requirements for sourcing.

Precision analog, isolation and cell monitoring

Start with the measurement error budget or interface architecture. Similar product numbers can have different channels, supply limits, topologies and footprints.

ADI · 24 ordering options

LTC6655 / LTC6655LN references

Compare LTC6655 and LTC6655LN output voltages, accuracy grades, MS8/LS8 packages and packing suffixes for precision ADC references.

ADI · 15 ordering options

AD8620 / AD8622 / AD8628 amplifiers

Compare AD8620, AD8622 and AD8628 amplifier architectures, supplies, channels and ordering options without assuming interchangeability.

ADI · 12 ordering options

ADuM1200 digital isolators

Compare ADuM1200 two-channel isolator data-rate grades, supply ranges, W and EP options, packages and complete ordering codes.

ADI · 13 ordering options

ADuM1401 digital isolators

Compare ADuM1401 four-channel, 3-forward/1-reverse isolator ordering options, data rates, supplies and wide-body SOIC packages.

ADI · 14 ordering options

LTC6811 battery stack monitors

Compare LTC6811-1 and LTC6811-2 isoSPI topologies, temperature grades, 3ZZ options and 48-lead SSOP ordering codes.

Cyclone FPGA and SoC devices

Separate fabric-only FPGA designs from processor-based SoC designs. Use the exact density-by-package I/O count and core-voltage option for board planning.

ALTERA · 46 ordering options

Cyclone V E FPGAs

Compare Cyclone V E 5CEFA5, 5CEFA7 and 5CEFA9 densities, package-specific I/O, speed and temperature ordering options.

ALTERA · 33 ordering options

Cyclone V SX SoC FPGAs

Compare Cyclone V SX 5CSXFC2/4/5/6 devices, HPS and FPGA resources, U23/F31 packages and complete SoC FPGA ordering codes.

ALTERA · 32 ordering options

Cyclone 10 LP FPGAs

Compare 10CL016 and 10CL025 Cyclone 10 LP packages, Y/Z core-voltage options, user I/O and speed/temperature grades.

What to establish before comparing prices

Match the exact variant

Package, speed, temperature, voltage or packing can change the purchasing identity. A shortened family name is not enough to quote; the complete ordering code is the item under comparison.

Compare package and grade, not just density

Body size, pitch and usable I/O belong to the package, not to the device maximum. A shared ball count does not establish a shared footprint or pinout.

Separate engineering release from the offer

Configuration files, timing approval, isolation requirements, topology and calibration remain engineering decisions. A quotation can confirm the offered lot; it cannot release the design.

Maintain an installed design

Keep the full approved MPN and board revision together. Review sourcing and lot evidence separately from engineering approval of an alternative.

Industrial maintenance procurement

Plan the destination and handoff

Give the purchasing, delivery and receiving requirements early so that a technically correct part can be quoted against the right shipment scope.

Saudi Arabia and UAE procurement requirements
Bench power supply, magnifying lens and loose components on an electronics workbench
Start analog selection with the measurement or interface requirement.
Industrial control console with switches, pushbuttons and a small display
Start equipment maintenance with the released board and exact component identity.