Skip to Content

Compare the complete ordering code

Artix-7 XC7A200T

XC7A200T offers 215,360 logic cells, 740 DSP slices and 13,140 Kb of block RAM. These device resources make it a different implementation target from XC7A100T. The useful purchasing comparison is the complete ordering code and the released design it supports, including package, timing grade and operating conditions.

Hands holding test probes against a circuit board above an open electronic unit

Is XC7A200T a direct upgrade from XC7A100T?

More resources do not make it a direct replacement. Compare the supported package pair, power requirements, bank connections and configuration settings, then rebuild and validate the design for the selected target. If the purpose is to keep an installed machine running, an unchanged approved ordering code is a different procurement task from a capacity upgrade.

How is the ordering code structured?

An ordering code combines the device identity with the fields that define its package, speed, temperature, voltage or packing, depending on the series. The example below shows the field boundaries; read the exact code from the approved BOM before comparing any offer.

XC7A200T-2FBG484I

Example ordering code from this series

FieldWhat it controls
DeviceXC7A200T fixes the Artix-7 density: 215,360 logic cells, 740 DSP slices and 13,140 Kb of block RAM at device level.
Speed option-2 is an ordering speed option. -1 and -L1 are different codes; the released timing must be checked for the selected target.
PackageFBG484 is a 484-ball package code. FBG, FFG, SBG, FB, FF, SB, FBV and FFV options are not interchangeable by name.
Temperature gradeI is the industrial grade used by the listed codes. Confirm the intended operating range and the exact device/package combination.
Lot and carrierDate-code window, carrier and quantity are procurement fields, not part of the base ordering code. Specify them separately.

Device characteristics

Artix-7 XC7A200T

Device family
Artix-7 XC7A200T
Logic cells (device)
215,360
DSP slices (device)
740
Block RAM (device)
13,140 Kb

These characteristics describe the device family. Exact package, grade and operating-condition limits are provided on each product page and in the manufacturer documents below.

Which XC7A200T package supports the required connections?

The listed codes cover 484-, 676- and 1156-ball packages. FBG, FFG, SBG, FBV and FFV designations describe different package options; use the AMD drawing and this device pinout to compare body size, pitch and bonded I/O.

PackageOptionsPackage codePins/ballsBody sizePitchConstruction
FB676 (BGA-676)3FB67667627 × 27 mm1.0 mmFlip-chip lidless BGA
FBG484 (BGA-484)3FBG48448423 × 23 mm1.0 mmFlip-chip lidless BGA
FBG676 (BGA-676)3FBG67667627 × 27 mm1.0 mmFlip-chip lidless BGA
FFG1156 (BGA-1156)3FFG1156115635 × 35 mm1.0 mmFlip-chip fine-pitch BGA
SBG484 (BGA-484)3SBG48448419 × 19 mm0.8 mmFlip-chip lidless BGA
FB484 (BGA-484)2FB48448423 × 23 mm1.0 mmFlip-chip lidless BGA
FF1156 (BGA-1156)2FF1156115635 × 35 mm1.0 mmFlip-chip fine-pitch BGA
SB484 (BGA-484)2SB48448419 × 19 mm0.8 mmFlip-chip lidless BGA
FBV676 (BGA-676)1FBV67667627 × 27 mm1.0 mmFlip-chip lidless BGA
FFV1156 (BGA-1156)1FFV1156115635 × 35 mm1.0 mmFlip-chip fine-pitch BGA

Package entries are compiled from the listed ordering codes. Where a device-by-package I/O count is recorded, it appears in the table; a ball or lead count alone does not establish usable I/O or footprint. Confirm the exact package drawing and device pinout.

Complete ordering options

Compare physical package and variant fields, then open an ordering code for its specifications, packing details and RFQ. All 23 options are listed below.

Artix-7 XC7A200T · ordering-code comparison
Ordering codePackageSpeed codeTemperature gradeDC
XC7A200T-2FBG484IFBG484 (BGA-484)-2I (Industrial)24+
XC7A200T-1FBG676IFBG676 (BGA-676)-1I (Industrial)24+
XC7A200T-2FFG1156IFFG1156 (BGA-1156)-2I (Industrial)24+
XC7A200T-2FF1156IFF1156 (BGA-1156)-2I (Industrial)23+
XC7A200T-L1FBG676IFBG676 (BGA-676)-L1I (Industrial)24+
XC7A200T-2SBG484ISBG484 (BGA-484)-2I (Industrial)24+
XC7A200T-2FB676IFB676 (BGA-676)-2I (Industrial)23+
XC7A200T-1FFG1156IFFG1156 (BGA-1156)-1I (Industrial)24+
XC7A200T-1SBG484ISBG484 (BGA-484)-1I (Industrial)24+
XC7A200T-2SB484ISB484 (BGA-484)-2I (Industrial)23+
XC7A200T-1FBG484IFBG484 (BGA-484)-1I (Industrial)24+
XC7A200T-L1SBG484ISBG484 (BGA-484)-L1I (Industrial)24+
XC7A200T-1FB484IFB484 (BGA-484)-1I (Industrial)23+
XC7A200T-2FBG676IFBG676 (BGA-676)-2I (Industrial)24+
XC7A200T-1FB676IFB676 (BGA-676)-1I (Industrial)23+
XC7A200T-2FB484IFB484 (BGA-484)-2I (Industrial)23+
XC7A200T-1SB484ISB484 (BGA-484)-1I (Industrial)23+
XC7A200T-1FF1156IFF1156 (BGA-1156)-1I (Industrial)23+
XC7A200T-L1FB676IFB676 (BGA-676)-L1I (Industrial)23+
XC7A200T-L1FBG484IFBG484 (BGA-484)-L1I (Industrial)24+
XC7A200T-L1FFG1156IFFG1156 (BGA-1156)-L1I (Industrial)24+
XC7A200T-2FFV1156IFFV1156 (BGA-1156)-2I (Industrial)25+
XC7A200T-1FBV676IFBV676 (BGA-676)-1I (Industrial)25+

Resolve these differences before ordering

DecisionWhat to matchPurchasing consequence
Package and pin assignmentMatch the complete package code to the approved board revision and manufacturer pinout.Equal ball counts alone do not establish footprint or signal compatibility.
Speed and temperatureUse the exact ordered device in implementation and timing analysis, including the required operating range.A different speed or temperature suffix requires engineering review before purchase.
Configuration and toolsRetain the project, constraints, programming image and tool version used to release the board.A component purchase cannot recover missing configuration files or approve a new device target.
Density migrationCompare device resources and supported migration paths in the manufacturer package documentation.Do not purchase a larger density on the assumption that the existing bitstream or PCB will work.
Small surface-mounted components and solder joints on a blue circuit board
Compare the package drawing and board footprint before considering a density change.
Engineer adjusting bench instruments connected with test leads
Bring the power and timing conditions into the engineering validation plan.

Manufacturer documentation

Engineering and sourcing guidance

Related series to evaluate

These series support adjacent selection tasks. A related listing is not an approved replacement.

XILINX · 23 ordering options

Artix-7 XC7A100T

Compare XC7A100T ordering codes, BGA packages, speed and temperature grades. Review Artix-7 device resources and quote an exact part.

XILINX · 17 ordering options

Kintex-7 XC7K410T

Compare XC7K410T Kintex-7 ordering options and packages. Review DSP, memory, thermal and configuration requirements for sourcing.

Ordering questions

How many XC7A200T ordering options are listed?

This guide lists 23 codes across 484-, 676- and 1156-ball packages, with -1, -2 and -L1 speed options and industrial temperature grades. The table preserves the complete ordering strings so package and speed differences remain visible.

What changes when moving from XC7A100T to XC7A200T?

The larger device has different resource counts and may use a different package and power envelope. Compare the actual board interfaces, bank assignments, configuration image and implementation results before treating the move as a purchase-only change.

Can an FBG package replace an FFG package with the same ball count?

A shared ball count does not establish a shared footprint or pin assignment. Check the package code, body dimensions, pitch and the device pinout; then confirm that the board can route the required signals.

Does the price quotation confirm the configuration image?

No. Configuration projects, constraints and programming images remain with the equipment or design owner. A component quotation addresses the device, offered lot, packing and delivery scope, not the programmable content.