Skip to Content

Compare the complete ordering code

Artix-7 XC7A100T

XC7A100T selection starts with the board interface, not just its 101,440 logic cells. This Artix-7 device provides 240 DSP slices and 4,860 Kb of block RAM; the package determines which connections are available to your design. Use the ordering-code table to separate package, speed and temperature options before requesting a lot.

Copper traces, solder joints and small components on a green circuit board

Can an XC7A100T package change preserve the existing board?

Only an approved pinout and layout comparison can establish that. CSG, FTG and FGG package designations must be checked against the specific device/package combination in AMD documentation. A matching device density does not preserve ball assignment, pitch or available I/O. For maintenance, start with the original complete ordering code; for a redesign, review the package alongside bank voltages and routing constraints.

How is the ordering code structured?

An ordering code combines the device identity with the fields that define its package, speed, temperature, voltage or packing, depending on the series. The example below shows the field boundaries; read the exact code from the approved BOM before comparing any offer.

XC7A100T-2FGG484I

Example ordering code from this series

FieldWhat it controls
DeviceXC7A100T fixes the Artix-7 device and the 101,440-logic-cell resource set. The family resources are a starting point for the implemented design, not a package I/O count.
Speed option-2 is the ordering speed option. Confirm the implementation and timing against the exact grade; -1, -3, -L1 and -2L are separate codes with their own datasheet conditions.
PackageFGG484 is a 484-ball package code. Body size, ball pitch and pin assignment come from the AMD package drawing, not from the ball count alone.
Temperature gradeI is the industrial grade. E is a separate extended-grade option; check the required operating range and the device/package combination.
Lot and carrierThe ordering code does not define the offered date code, carrier or quantity. State those requirements in the RFQ and confirm them in the quotation.

Device characteristics

Artix-7 XC7A100T

Device family
Artix-7 XC7A100T
Logic cells (device)
101,440
DSP slices (device)
240
Block RAM (device)
4,860 Kb

These characteristics describe the device family. Exact package, grade and operating-condition limits are provided on each product page and in the manufacturer documents below.

Which XC7A100T package fits the existing board?

The listed codes span CSG324, FTG256, CS324, FT256, FG484, FGG484, FFG484, FG676 and FGG676 packages. Ball count alone does not establish the footprint: compare the package drawing, pitch and the signals bonded out for this device.

PackageOptionsPackage codePins/ballsBody sizePitchConstruction
FGG484 (BGA-484)5FGG48448423 × 23 mm1.0 mmWire-bond fine-pitch BGA
FTG256 (BGA-256)4FTG25625617 × 17 mm1.0 mmWire-bond fine-pitch BGA
CSG324 (BGA-324)3CSG32432415 × 15 mm0.8 mmWire-bond chip-scale BGA
FGG676 (BGA-676)3FGG67667627 × 27 mm1.0 mmWire-bond fine-pitch BGA
FG484 (BGA-484)2FG48448423 × 23 mm1.0 mmWire-bond fine-pitch BGA
FG676 (BGA-676)2FG67667627 × 27 mm1.0 mmWire-bond fine-pitch BGA
FT256 (BGA-256)2FT25625617 × 17 mm1.0 mmWire-bond fine-pitch BGA
CS324 (BGA-324)1CS32432415 × 15 mm0.8 mmWire-bond chip-scale BGA
FFG484 (BGA-484)1FFG48448423 × 23 mm1.0 mm—

Package entries are compiled from the listed ordering codes. Where a device-by-package I/O count is recorded, it appears in the table; a ball or lead count alone does not establish usable I/O or footprint. Confirm the exact package drawing and device pinout.

Complete ordering options

Compare physical package and variant fields, then open an ordering code for its specifications, packing details and RFQ. All 23 options are listed below.

Artix-7 XC7A100T · ordering-code comparison
Ordering codePackageSpeed codeTemperature gradeDC
XC7A100T-2FGG676IFGG676 (BGA-676)-2I (Industrial)24+
XC7A100T-2CSG324ICSG324 (BGA-324)-2I (Industrial)24+
XC7A100T-1FTG256IFTG256 (BGA-256)-1I (Industrial)24+
XC7A100T-1FG484IFG484 (BGA-484)-1I (Industrial)23+
XC7A100T-3FTG256EFTG256 (BGA-256)-3E (Extended)24+
XC7A100T-2FG484IFG484 (BGA-484)-2I (Industrial)23+
XC7A100T-2FGG484IFGG484 (BGA-484)-2I (Industrial)24+
XC7A100T-L1FTG256IFTG256 (BGA-256)-L1I (Industrial)24+
XC7A100T-1FGG484IFGG484 (BGA-484)-1I (Industrial)24+
XC7A100T-1FGG676IFGG676 (BGA-676)-1I (Industrial)24+
XC7A100T-1CSG324ICSG324 (BGA-324)-1I (Industrial)24+
XC7A100T-1CS324ICS324 (BGA-324)-1I (Industrial)23+
XC7A100T-3FGG484EFGG484 (BGA-484)-3E (Extended)24+
XC7A100T-2FTG256IFTG256 (BGA-256)-2I (Industrial)24+
XC7A100T-L1CSG324ICSG324 (BGA-324)-L1I (Industrial)24+
XC7A100T-2FT256IFT256 (BGA-256)-2I (Industrial)23+
XC7A100T-L1FGG484IFGG484 (BGA-484)-L1I (Industrial)24+
XC7A100T-1FG676IFG676 (BGA-676)-1I (Industrial)23+
XC7A100T-L1FGG676IFGG676 (BGA-676)-L1I (Industrial)24+
XC7A100T-2LFGG484EFGG484 (BGA-484)-2LE (Extended)24+
XC7A100T-2FG676IFG676 (BGA-676)-2I (Industrial)23+
XC7A100T-2FFG484IFFG484 (BGA-484)-2I (Industrial)24+
XC7A100T-1FT256IFT256 (BGA-256)-1I (Industrial)23+

Resolve these differences before ordering

DecisionWhat to matchPurchasing consequence
Package and pin assignmentMatch the complete package code to the approved board revision and manufacturer pinout.Equal ball counts alone do not establish footprint or signal compatibility.
Speed and temperatureUse the exact ordered device in implementation and timing analysis, including the required operating range.A different speed or temperature suffix requires engineering review before purchase.
Configuration and toolsRetain the project, constraints, programming image and tool version used to release the board.A component purchase cannot recover missing configuration files or approve a new device target.
Resource headroomReview post-implementation logic, DSP and memory usage as well as timing.A design that fits the logic count can still fail its routing or interface requirements.
Hands holding test probes against a circuit board above an open electronic unit
Retain the board revision and configuration target when reviewing a replacement.
Industrial control console with switches, pushbuttons and a small display
Equipment interfaces determine the I/O and timing constraints that the released design must retain.

Manufacturer documentation

Engineering and sourcing guidance

Related series to evaluate

These series support adjacent selection tasks. A related listing is not an approved replacement.

XILINX · 23 ordering options

Artix-7 XC7A200T

Compare XC7A200T Artix-7 packages and complete ordering codes, with device resources, migration checks and sourcing requirements.

XILINX · 22 ordering options

Kintex-7 XC7K325T

Review XC7K325T Kintex-7 ordering codes, FBG/FFG package choices, speed grades and interface checks before an RFQ.

Ordering questions

How many XC7A100T ordering options are listed?

This guide lists 23 ordering codes across CSG324, FTG256, CS324, FT256, FG484, FGG484, FFG484, FG676 and FGG676 packages. The speed options include -1, -2, -3, -L1 and -2L, with I or E temperature grades. Use the table to identify the exact code, then confirm the offered lot in the quotation.

Can an XC7A100T-2FGG484I replace an XC7A100T-2FG484I?

Both are 484-ball options, but FG and FGG are different package codes. Compare the approved drawing, finish and assembly process before substituting. A shared ball count does not establish the same approved configuration.

Does a -L1 code mean the same thing as a -1 code?

No. -L1 and -2L are distinct ordering strings. Confirm the applicable speed, voltage and timing conditions in AMD DS180 for the exact device and package rather than inferring a ranking from the letter position.

What lot evidence should an installed-board request include?

State the permitted date-code window, single-lot requirement, carrier and the traceability or inspection records needed for release. The quotation should identify the offered lot and packing so that the maintenance decision can be made against the actual material.