Skip to Content
Small integrated circuits and passive components on a populated board
Technical Analysis

LTC6655 LS8 vs MS8: Package Choice for Stable Measurements

By SupplyICs Editorial
Table of Contents

Calibration at room temperature does not predict the output after a thermal cycle. For precision instruments, the return error can matter more than a small difference in the initial calibration result.

LTC6655 package selection is therefore a decision about the instrument’s environmental history and assembly design. MS8 and LS8 are not interchangeable footprints, and their packaging should not be confused with reel quantity or shipping condition.

When does the LS8 package deserve priority?

Evaluate LS8 when humidity sensitivity and stability after thermal excursions are significant parts of the instrument’s error budget. Evaluate MS8 when its assembly footprint and verified environmental performance meet the instrument’s requirements without the LS8 package.

The LTC6655/LTC6655LN datasheet distinguishes the 8-lead MSOP from the hermetic 5 mm × 5 mm LS8 package and describes the LS8 stability characteristics. Its thermal-hysteresis and long-term-drift figures have stated test conditions; they are not blanket guarantees for every board and environmental cycle.

Keep output voltage and accuracy grade fixed while comparing packages. Comparing a 2.5 V B-grade MS8 option with a different voltage or grade in LS8 mixes multiple variables. The LTC6655 series directory helps separate voltage, grade, package and noise-reduction options before selecting evaluation parts. For example, LTC6655BHMS8-2.5#PBF and LTC6655BHLS8-2.5#PBF retain the 2.5 V B/H ordering fields while changing the package.

How do thermal hysteresis and temperature coefficient differ?

Temperature coefficient describes output change with temperature under specified conditions. Thermal hysteresis describes the output’s failure to return exactly to its earlier value after a temperature excursion. A single compensation slope cannot necessarily remove a history-dependent shift.

A practical comparison records a stable baseline at the reference temperature, applies the intended thermal excursion, then returns to that same reference temperature and waits for the agreed stabilization condition. Compute return error as:

Return error, ppm = (Vafter − Vbefore) / Vbefore × 1,000,000.

In a 2.5 V instrument example, a 50 µV return shift is 20 ppm. For a 16-bit converter using the full 2.5 V reference span, one ideal least significant bit is about 38.1 µV. The shift is therefore about 1.31 ideal LSB at full scale before other error sources. This illustrates the system consequence; it is not a measurement of either package.

Repeat the comparison across relevant thermal histories rather than assuming that one excursion represents years of service. Keep measurement-system drift, connector thermal voltages and warm-up time under control so they do not masquerade as reference hysteresis.

A package comparison needs a controlled assembly history

Both candidates should be evaluated after the assembly process they will actually experience. Differences in reflow, board strain, cleaning and mounting can confound a package comparison even when the reference circuit is otherwise identical.

Variable to hold or record Why it matters Useful comparison output
Voltage and accuracy grade Prevents electrical-grade differences from being assigned to packaging Exact ordering-code pair
Reflow and cleaning history Establishes the condition in which calibration begins Assembly revision and process record
Board position and mounting Controls strain and local thermal gradients Layout and mechanical configuration
Thermal cycle and stabilization Defines the return-error experiment Before/after output with temperature history
Humidity exposure Addresses a package-specific stability concern Separate environmental result, not a combined unexplained drift figure

The voltage-reference error-budget pillar explains how to combine the reference contribution with converter and signal-chain errors. Keep the package comparison’s measured or specified contribution separate so it can be revised without rebuilding the entire budget.

What should change in the procurement specification?

Specify the complete voltage, grade and package code, the approved board revision and the packing required by assembly. A request for “LTC6655, equivalent package accepted” leaves the stability decision unresolved.

A package substitution should reopen the footprint, assembly and environmental comparison. A carrier-only change instead calls for review of handling, feeder compatibility and traceability. Those are different approval paths and should not share an unrestricted alternate-part field.

Noise-reduction filtering is another independent choice. Use the LTC6655 versus LTC6655LN bandwidth comparison when the question is integrated noise or filter settling. Selecting a more stable package does not by itself establish the noise performance of the assembled measurement system. If the replacement cannot demonstrate the required return behavior in the intended assembly, keep the original package approved and treat the alternate as an engineering trial rather than a purchasing substitution.

Frequently Asked Questions (FAQ)

Does the LS8 package eliminate the need for calibration?

No. Initial error, temperature behavior, circuit loading and the rest of the measurement chain still affect calibration. Package stability changes part of that budget.

Is tape and reel the same choice as MS8 versus LS8?

No. MS8 and LS8 identify device packages. Tape-and-reel suffixes describe the delivery carrier and must be specified separately.

Can a package change be approved using room-temperature readings alone?

Room-temperature readings can establish an initial comparison, but they do not characterize thermal-cycle return error or humidity-related stability. Test the environmental history relevant to the instrument.

Share:

Need Electronic Components?

Our team specializes in sourcing hard-to-find, EOL, and obsolete components with full traceability. Get a personalized quote within 24 hours.