Skip to Content

Compare the complete ordering code

LTC6655 / LTC6655LN references

A reference sets the scale for an ADC or DAC measurement. The LTC6655 ordering string selects the output voltage, accuracy grade, physical package and packing option; the LN version adds a noise-reduction pin. Keep these choices separate when comparing offers, because a common family name can hide a changed error budget or PCB footprint.

Oscilloscope and electronic test instruments on a laboratory bench

How should LTC6655 and LTC6655LN be compared?

Start with output voltage and the permitted initial error and temperature drift. Then compare noise in the measurement bandwidth and the output network required by the converter. LTC6655LN uses an external capacitor at its NR pin, so startup and settling belong in the comparison. MS8 plastic MSOP and LS8 ceramic packages have different physical requirements; a package change is not merely a shipping choice.

How is the ordering code structured?

An ordering code combines the device identity with the fields that define its package, speed, temperature, voltage or packing, depending on the series. The example below shows the field boundaries; read the exact code from the approved BOM before comparing any offer.

LTC6655BHMS8-2.5#TRPBF

Example ordering code from this series

FieldWhat it controls
ModelLTC6655 or LTC6655LN. The LN version adds an NR pin for an external noise-reduction capacitor; its startup and settling behavior belong in the comparison.
Accuracy gradeB or C selects the guaranteed initial accuracy and temperature-drift limits. Compare the datasheet conditions, not just the grade letter.
PackageMS8 is a plastic MSOP-8; LS8 is a hermetic ceramic LCC-8. They have different body and assembly requirements.
Output voltage2.5 or 4.096 sets the nominal reference output. A different voltage changes the converter full scale.
Packing#PBF and #TRPBF are ordering options for finish and packing. Confirm the supplied carrier and quantity; do not infer a reel from #PBF alone.

Device characteristics

LTC6655

Reference architecture
Precision bandgap voltage reference
Specified temperature range
−40°C to +125°C

LTC6655LN

Reference architecture
Precision bandgap voltage reference
Specified temperature range
−40°C to +125°C

These characteristics describe the device family. Exact package, grade and operating-condition limits are provided on each product page and in the manufacturer documents below.

How do the MS8 and LS8 package options differ?

MS8 is a plastic MSOP-8 with a 3 × 3 mm nominal body and 0.65 mm lead pitch. LS8 is a hermetic ceramic LCC-8. The footprint, assembly process and thermal path differ, so a package change is a board-level decision.

PackageOptionsPackage codePins/ballsBody sizePitch
MS8 (MSOP-8)16MS883 × 3 mm nominal0.65 mm
LS8 (LCC-8)8LS885 × 5 mm—

Package entries are compiled from the listed ordering codes. Where a device-by-package I/O count is recorded, it appears in the table; a ball or lead count alone does not establish usable I/O or footprint. Confirm the exact package drawing and device pinout.

Complete ordering options

Compare physical package and variant fields, then open an ordering code for its specifications, packing details and RFQ. All 24 options are listed below.

LTC6655 / LTC6655LN references · ordering-code comparison
Ordering codePackageOutputAccuracy gradeDC
LTC6655BHMS8-2.5#TRPBFMS8 (MSOP-8)2.5 VB25+
LTC6655BHMS8-2.5#PBFMS8 (MSOP-8)2.5 VB25+
LTC6655CHMS8-2.5#PBFMS8 (MSOP-8)2.5 VC25+
LTC6655CHLS8-2.5#PBFLS8 (LCC-8)2.5 VC24+
LTC6655CHMS8-4.096#PBFMS8 (MSOP-8)4.096 VC25+
LTC6655BHMS8-4.096#PBFMS8 (MSOP-8)4.096 VB25+
LTC6655LNCHMS8-4.096#PBFMS8 (MSOP-8)4.096 VC25+
LTC6655BHLS8-4.096#PBFLS8 (LCC-8)4.096 VB24+
LTC6655CHMS8-2.5#TRPBFMS8 (MSOP-8)2.5 VC25+
LTC6655CHLS8-4.096#PBFLS8 (LCC-8)4.096 VC24+
LTC6655LNBHMS8-4.096#PBFMS8 (MSOP-8)4.096 VB25+
LTC6655BHLS8-2.5#PBFLS8 (LCC-8)2.5 VB24+
LTC6655LNBHMS8-2.5#PBFMS8 (MSOP-8)2.5 VB25+
LTC6655CHMS8-4.096#TRPBFMS8 (MSOP-8)4.096 VC25+
LTC6655LNCHMS8-2.5#PBFMS8 (MSOP-8)2.5 VC25+
LTC6655BHMS8-4.096#TRPBFMS8 (MSOP-8)4.096 VB25+
LTC6655LNBHMS8-2.5#TRPBFMS8 (MSOP-8)2.5 VB25+
LTC6655LNBHMS8-4.096#TRPBFMS8 (MSOP-8)4.096 VB25+
LTC6655LNCHMS8-2.5#TRPBFMS8 (MSOP-8)2.5 VC25+
LTC6655LNCHMS8-4.096#TRPBFMS8 (MSOP-8)4.096 VC25+
LTC6655LNBHLS8-2.5#PBFLS8 (LCC-8)2.5 VB24+
LTC6655LNBHLS8-4.096#PBFLS8 (LCC-8)4.096 VB24+
LTC6655LNCHLS8-4.096#PBFLS8 (LCC-8)4.096 VC24+
LTC6655LNCHLS8-2.5#PBFLS8 (LCC-8)2.5 VC24+

Resolve these differences before ordering

DecisionWhat to matchPurchasing consequence
Output and accuracyMatch the voltage after the dash and the electrical grade to the ADC error budget.A different voltage changes full scale; a different accuracy grade changes guaranteed limits.
LN option and capacitorsReview the NR pin, startup, output capacitor and converter transient load.Lower reference noise alone does not establish measurement-chain performance.
MS8 or LS8Compare the footprint and package characteristics in the datasheet.Do not substitute the ceramic and plastic package options on an unchanged layout.
Packing suffixRetain #PBF or #TRPBF in the requested MPN and agree on carrier and quantity.Packing requirements affect assembly preparation even when electrical limits match.
Small surface-mounted components and solder joints on a blue circuit board
Board layout, surrounding components and the reference load contribute to measurement performance.
Meter probes touching a circuit board beside a digital multimeter
Define the measurement conditions before comparing reference accuracy or an offered substitute.

Manufacturer documentation

Engineering and sourcing guidance

Related series to evaluate

These series support adjacent selection tasks. A related listing is not an approved replacement.

ADI · 15 ordering options

AD8620 / AD8622 / AD8628 amplifiers

Compare AD8620, AD8622 and AD8628 amplifier architectures, supplies, channels and ordering options without assuming interchangeability.

ADI · 12 ordering options

ADuM1200 digital isolators

Compare ADuM1200 two-channel isolator data-rate grades, supply ranges, W and EP options, packages and complete ordering codes.

Ordering questions

Which LTC6655 combinations are listed?

This guide lists 24 codes covering 2.5 V and 4.096 V outputs, B and C grades, MS8 and LS8 packages, LN and non-LN versions, and #PBF or #TRPBF packing options. The complete ordering string is the entity to quote.

What does the LN version change in a design?

LTC6655LN adds an NR pin for an external noise-reduction capacitor. Choose that capacitor and the output network using the datasheet, including the effect on startup and settling, and compare noise over the bandwidth used by the converter.

Does #PBF mean the part ships on tape and reel?

#PBF identifies the lead-free ordering option; #TRPBF identifies the tape-and-reel option. Confirm the carrier, quantity and whether the shipment is an original reel or a cut quantity in the quotation.

Can a C grade be replaced by a B grade?

The B and C grades have different guaranteed limits. A tighter grade can be a candidate, but confirm the error budget, drift and the exact offered code. Grade substitution still requires the applicable engineering review.