For reference only. See manufacturer datasheet for exact specs.
LTC6811HG-2#PBF
Analog Devices • SSOP-48
Product Overview: LTC6811HG-2#PBF is a 12-cell battery stack monitor with a 16-bit ADC and an individually addressed parallel isoSPI interface. The H-grade device is supplied in a 48-lead plastic SSOP and is specified from −40°C to +125°C.
Catalog Status, Inventory & Sourcing
Catalog status
Active
Inventory
In Stock - Request Rapid Quote
Supply packing
Tube
Lead Time
Confirm with quote
Need multiple parts?
Upload your BOM for combined pricing
Technical details and ordering options
- Series cells monitored
- Up to 12
- Cell measurement range
- 0 V to 5 V
- ADC resolution
- 16 bits
- isoSPI data rate
- 1 Mbps
- Communication topology
- Individually addressed parallel isoSPI
- Auxiliary GPIO / analog inputs
- 5
- Cell balancing
- Passive, with programmable timer
- Manufacturer package code
- G (48-lead plastic SSOP)
- Lead count
- 48
- Specified operating temperature
- −40°C to +125°C
- Temperature grade
- H
- Ordering option
- Standard
- Moisture sensitivity level
- MSL 1
Design and ordering notes
Design the cell-input filtering, balance-current paths and isoSPI network together. The ADC filter mode sets a noise-versus-conversion-time tradeoff. Cell measurement accuracy depends on the voltage, temperature and conversion mode specified in the electrical-characteristics table.
- The -2 suffix selects the individually addressed parallel communication topology. Match the host interface and isoSPI wiring to this version.
- The H temperature grade is specified for −40°C to +125°C; do not substitute an I-grade option where the H-grade upper limit is required.
- For automotive designs, select the corresponding #3ZZ ordering option specified by Analog Devices; the standard suffix alone does not identify that manufacturing flow.
- This ordering code selects tube supply. #PBF and #TRPBF retain the same G-package body but specify different packing options.
Manufacturer documents
Lifecycle and replacement review
The catalog status for LTC6811HG-2#PBF is Active. Manufacturer lifecycle details, where available, are shown in the product content and manufacturer documents.
For a replacement review, provide the approved datasheet, operating conditions, package and pinout, and any firmware constraints. Use the component alternatives workflow to separate potential candidates from parts qualified for your design.
Procurement details to confirm
| Item | For this inquiry |
|---|---|
| Ordering code and package | LTC6811HG-2#PBF · SSOP-48; verify suffix and package drawing. |
| Quantity and MOQ | Specify required quantity; request the lot's order minimum and pack size. |
| Date code and handling | Confirm actual lot date codes, MSL, packaging and storage records where applicable. |
| Delivery and inspection | Agree on dispatch timing, destination and required inspection evidence in the quotation. |
LTC6811HG-2#PBF sourcing questions
Are LTC6811-1 and LTC6811-2 interchangeable?
LTC6811-1 supports a daisy chain, while LTC6811-2 uses individually addressed devices connected in parallel to the host. Their communication pin functions and network configuration differ. Review the schematic, transformer network and firmware before changing the topology suffix.
What should I include in a quote request for LTC6811HG-2#PBF?
Include the complete LTC6811HG-2#PBF ordering code, quantity, required delivery date, destination, and any date-code or documentation constraints. Confirm the listed SSOP-48 package against your approved BOM.
Is LTC6811HG-2#PBF still in production?
The catalog status for LTC6811HG-2#PBF is Active. See the manufacturer documents and lifecycle section for the manufacturer's current production status and any discontinuation notice.
Can another ADI part replace LTC6811HG-2#PBF?
A shared manufacturer or package does not establish compatibility. Compare pinout, electrical limits, timing, temperature range and software requirements, then validate the candidate in the intended design.
Are price, MOQ and delivery time fixed?
These depend on the available lot, packaging, quantity, inspection scope and destination. Request a written quotation for current terms before placing an order.
Further reading
More LTC6811-2 battery stack monitor ordering options
Compare the full ordering codes, packages and electrical grades before selecting another option. Compatibility with LTC6811HG-2#PBF has not been established.
Request Pricing & Availability
Confirm current lot details and quotation terms