Skip to Content

Compare the complete ordering code

LTC6811 battery stack monitors

LTC6811 monitors up to 12 series-connected cells. The -1 and -2 variants use different isoSPI connection topologies, while temperature and additional ordering options remain separate decisions. A battery stack monitor measures cells; the pack’s protection, control and safety functions require the surrounding system.

Hand holding a charging connector at the charge port of an electric car

What is the difference between LTC6811-1 and LTC6811-2?

LTC6811-1 uses a daisy-chain isoSPI interface; LTC6811-2 uses individually addressed parallel isoSPI. That distinction affects the network and host communication design. Select the topology before considering packing or temperature variants, and retain the full -1 or -2 suffix in the quote request. These are not substitutions to approve solely from a shared SSOP footprint.

How is the ordering code structured?

An ordering code combines the device identity with the fields that define its package, speed, temperature, voltage or packing, depending on the series. The example below shows the field boundaries; read the exact code from the approved BOM before comparing any offer.

LTC6811HG-1#PBF

Example ordering code from this series

FieldWhat it controls
ModelLTC6811 measures up to 12 series-connected cells with a 16-bit ADC and 0 V to 5 V cell range.
TemperatureI is specified from −40°C to +85°C; H is specified from −40°C to +125°C. Confirm the required operating range.
PackageG is the 48-lead plastic SSOP package used by all listed options.
Topology-1 is daisy-chain isoSPI; -2 is individually addressed parallel isoSPI. The network and firmware differ.
Options and packing#3ZZ is an additional ordering option; #PBF is tube and #TRPBF is tape and reel. Confirm the exact option and carrier.

Device characteristics

LTC6811-1 battery stack monitor

Series cells monitored
Up to 12
Cell measurement range
0 V to 5 V
ADC resolution
16 bits
isoSPI data rate
1 Mbps
Communication topology
Daisy-chain isoSPI
Auxiliary GPIO / analog inputs
5
Cell balancing
Passive, with programmable timer

LTC6811-2 battery stack monitor

Series cells monitored
Up to 12
Cell measurement range
0 V to 5 V
ADC resolution
16 bits
isoSPI data rate
1 Mbps
Communication topology
Individually addressed parallel isoSPI
Auxiliary GPIO / analog inputs
5
Cell balancing
Passive, with programmable timer

These characteristics describe the device family. Exact package, grade and operating-condition limits are provided on each product page and in the manufacturer documents below.

Which LTC6811 topology and temperature grade is required?

All 14 codes use the 48-lead G package. The -1/-2 topology, I/H temperature grade and 3ZZ ordering option are the fields that change the design and purchase record.

PackageOptionsPackage codePins/balls
SSOP-4814G (48-lead plastic SSOP)48

Package entries are compiled from the listed ordering codes. Where a device-by-package I/O count is recorded, it appears in the table; a ball or lead count alone does not establish usable I/O or footprint. Confirm the exact package drawing and device pinout.

Complete ordering options

Compare physical package and variant fields, then open an ordering code for its specifications, packing details and RFQ. All 14 options are listed below.

LTC6811 battery stack monitors · ordering-code comparison
Ordering codePackageTopologyTemperatureDC
LTC6811HG-1#PBFSSOP-48Daisy-chain isoSPI−40°C to +125°C24+
LTC6811IG-1#TRPBFSSOP-48Daisy-chain isoSPI−40°C to +85°C24+
LTC6811IG-2#TRPBFSSOP-48Individually addressed parallel isoSPI−40°C to +85°C24+
LTC6811IG-1#3ZZPBFSSOP-48Daisy-chain isoSPI−40°C to +85°C25+
LTC6811HG-1#3ZZTRPBFSSOP-48Daisy-chain isoSPI−40°C to +125°C25+
LTC6811IG-1#PBFSSOP-48Daisy-chain isoSPI−40°C to +85°C24+
LTC6811IG-2#PBFSSOP-48Individually addressed parallel isoSPI−40°C to +85°C24+
LTC6811HG-2#PBFSSOP-48Individually addressed parallel isoSPI−40°C to +125°C24+
LTC6811IG-1#3ZZTRPBFSSOP-48Daisy-chain isoSPI−40°C to +85°C25+
LTC6811HG-2#3ZZTRPBFSSOP-48Individually addressed parallel isoSPI−40°C to +125°C25+
LTC6811HG-1#TRPBFSSOP-48Daisy-chain isoSPI−40°C to +125°C24+
LTC6811HG-1#3ZZPBFSSOP-48Daisy-chain isoSPI−40°C to +125°C25+
LTC6811HG-2#3ZZPBFSSOP-48Individually addressed parallel isoSPI−40°C to +125°C25+
LTC6811IG-2#3ZZPBFSSOP-48Individually addressed parallel isoSPI−40°C to +85°C25+

Resolve these differences before ordering

DecisionWhat to matchPurchasing consequence
Communication topologyMatch -1 or -2 to the network wiring and host firmware.An incorrect topology can prevent communication even when the part fits the PCB.
Cell inputs and balancingReview cell filters, balance-current paths and the selected ADC conversion mode.System measurement performance depends on the circuit and conversion settings.
Temperature and 3ZZKeep the full grade and option string required by the approved design.Do not infer automotive qualification from the base family or from another ordering option.
Pack protectionDefine fault detection, switching and system validation separately from cell measurement.A monitor selection does not establish a complete battery safety function.
Inductors and surface-mounted components on a blue circuit board
Power and sensing circuits require separate checks of voltage limits, connections and protection.
Engineer adjusting bench instruments connected with test leads
Set out the measurement and communication checks before releasing a battery-monitoring assembly.

Manufacturer documentation

Engineering and sourcing guidance

Related series to evaluate

These series support adjacent selection tasks. A related listing is not an approved replacement.

ADI · 12 ordering options

ADuM1200 digital isolators

Compare ADuM1200 two-channel isolator data-rate grades, supply ranges, W and EP options, packages and complete ordering codes.

ADI · 13 ordering options

ADuM1401 digital isolators

Compare ADuM1401 four-channel, 3-forward/1-reverse isolator ordering options, data rates, supplies and wide-body SOIC packages.

Ordering questions

Are all LTC6811 ordering options in the same package?

Yes. The 14 listed codes use the 48-lead G plastic SSOP. The differences are the -1/-2 isoSPI topology, the I or H temperature grade, the 3ZZ ordering option and #PBF or #TRPBF packing. The package alone does not identify the part.

What does the 3ZZ option mean?

The 3ZZ suffix is an additional ordering option used for automotive requirements. Confirm the applicable part-specific documentation before design release; the base family or another ordering option does not establish that qualification.

Are #PBF and #TRPBF different packing options?

#PBF is the tube ordering option and #TRPBF is the tape-and-reel option. Confirm the offered quantity and carrier in the quotation rather than inferring them from the base code.

Does the LTC6811 protect the battery pack?

No. It measures cell voltages and supports passive balancing. Pack protection, contactor control, fault handling and safety validation require the surrounding system and are separate design responsibilities.