AD8620
- Channels
- 2
- Input architecture
- JFET input
- Specified supply range
- ±5 V to ±13 V
- Specified temperature range
- −40°C to +125°C
Compare the complete ordering code
AD8620, AD8622 and AD8628 share a number prefix but perform different jobs. AD8620 is a dual JFET-input amplifier, AD8622 is a dual precision amplifier with rail-to-rail output, and AD8628 is a single zero-drift amplifier. Use the family specifications and package table together before investigating a replacement.
A name similarity does not support that substitution. Channel count, supply range, input behavior and pinout differ. AD8628 is fully specified on a 2.7 V to 5 V single supply; AD8620 and AD8622 have different specified supply ranges. Establish the circuit supply, source impedance, gain, load and bandwidth first, then validate a candidate against those conditions.
An ordering code combines the device identity with the fields that define its package, speed, temperature, voltage or packing, depending on the series. The example below shows the field boundaries; read the exact code from the approved BOM before comparing any offer.
AD8628ARZ-REEL7
Example ordering code from this series
| Field | What it controls |
|---|---|
| Model | AD8620 is a dual JFET-input amplifier; AD8622 is a dual precision amplifier with rail-to-rail output; AD8628 is a single zero-drift amplifier. |
| Grade | A, B and W suffixes select the applicable electrical or automotive grade for the model. Read the model-specific datasheet column. |
| Package | ARZ is SOIC-8, ARMZ is MSOP-8 and ARTZ is SOT-23-5. Package codes and pinouts differ by model. |
| Packing | -REEL, -REEL7, -R7 and -RL identify reel or packing options. Keep the suffix in the RFQ and confirm the supplied carrier. |
| Lifecycle | A lifecycle notice applies to a specific ordering code. Check the complete code before treating a related model as a replacement. |
These characteristics describe the device family. Exact package, grade and operating-condition limits are provided on each product page and in the manufacturer documents below.
SOIC-8, MSOP-8 and SOT-23-5 options appear in this series. Compare the channel count, supply range and pinout before treating a common footprint as a substitution.
| Package | Options | Package code | Pins/balls | Construction |
|---|---|---|---|---|
| SOIC-8 | 12 | R-8 | 8 | Narrow-body SOIC (SOIC_N) |
| MSOP-8 | 2 | RM-8 | 8 | — |
| SOT-23-5 | 1 | RJ-5 | 5 | — |
Package entries are compiled from the listed ordering codes. Where a device-by-package I/O count is recorded, it appears in the table; a ball or lead count alone does not establish usable I/O or footprint. Confirm the exact package drawing and device pinout.
Compare physical package and variant fields, then open an ordering code for its specifications, packing details and RFQ. All 15 options are listed below.
| Ordering code | Package | Channels | Specified supply | DC |
|---|---|---|---|---|
| AD8620ARZ | SOIC-8 | 2 | ±5 V to ±13 V | 24+ |
| AD8620ARZ-REEL7 | SOIC-8 | 2 | ±5 V to ±13 V | 25+ |
| AD8620BRZ | SOIC-8 | 2 | ±5 V to ±13 V | 24+ |
| AD8620BRZ-REEL | SOIC-8 | 2 | ±5 V to ±13 V | 25+ |
| AD8622ARZ | SOIC-8 | 2 | ±2.5 V to ±15 V | 25+ |
| AD8622ARMZ-R7 | MSOP-8 | 2 | ±2.5 V to ±15 V | 25+ |
| AD8622ARZ-REEL7 | SOIC-8 | 2 | ±2.5 V to ±15 V | 25+ |
| AD8622ARZ-REEL | SOIC-8 | 2 | ±2.5 V to ±15 V | 25+ |
| AD8622ARMZ | MSOP-8 | 2 | ±2.5 V to ±15 V | 25+ |
| AD8628ARZ-REEL | SOIC-8 | 1 | 2.7 V to 5 V | 25+ |
| AD8628ARZ | SOIC-8 | 1 | 2.7 V to 5 V | 25+ |
| AD8628ARTZ-REEL7 | SOT-23-5 | 1 | 2.7 V to 5 V | 25+ |
| AD8628WARZ-RL | SOIC-8 | 1 | 2.7 V to 5 V | 22+ |
| AD8628WARZ-R7 | SOIC-8 | 1 | 2.7 V to 5 V | 26+ |
| AD8628ARZ-REEL7 | SOIC-8 | 1 | 2.7 V to 5 V | 25+ |
| Decision | What to match | Purchasing consequence |
|---|---|---|
| DC error | Calculate input bias-current error at the actual source resistance and include offset and drift. | Low offset alone can be a poor predictor of total circuit error. |
| Supply and signal swing | Check specified supply, common-mode range and output swing at the intended load. | Rail-to-rail terminology does not remove load- or supply-dependent limits. |
| Channels and package | Compare the single/dual channel arrangement and exact package pinout. | SOIC, MSOP and SOT-23 options cannot be selected by lead count alone. |
| Lifecycle and release | Read notices for the complete ordering code, then validate stability and settling. | A listed manufacturer replacement still requires application qualification. |
These series support adjacent selection tasks. A related listing is not an approved replacement.
ADI · 24 ordering options
Compare LTC6655 and LTC6655LN output voltages, accuracy grades, MS8/LS8 packages and packing suffixes for precision ADC references.
ADI · 13 ordering options
Compare ADuM1401 four-channel, 3-forward/1-reverse isolator ordering options, data rates, supplies and wide-body SOIC packages.
AD8620 is a dual JFET-input amplifier, AD8622 is a dual precision amplifier with rail-to-rail output, and AD8628 is a single zero-drift amplifier. Their channel counts, supply ranges, input behavior and pinouts serve different circuit requirements.
ARZ selects the 8-lead SOIC package, ARMZ selects the 8-lead MSOP package, and ARTZ selects the 5-lead SOT-23 package. The suffixes are model-specific; confirm the package drawing for the exact ordering code.
They identify reel or packing options for the ordered device. Keep the suffix on the purchase order and confirm carrier dimensions, quantity and whether the shipment is an original reel or a cut quantity.
ADI PDN 16_0050 Rev. E lists AD8628WARZ-RL as discontinued and identifies AD8628WARZ-R7 as a related option. The catalog entry describes offered stock, not continued production; confirm the lot and lifecycle evidence for the exact code.