ADuM1401
- Isolation channels
- 4
- Channel direction
- 3 forward / 1 reverse
- Isolation withstand (UL 1577, 1 minute)
- 2,500 Vrms
Compare the complete ordering code
ADuM1401 provides three forward channels and one reverse channel in a four-channel isolator. That direction split is central to interface selection. Compare the required return signal, rate, supply domains and temperature range before deciding which full ordering code belongs on the BOM.
No. Four channels can have different direction arrangements, timing and default output behavior. Even within an ADuM family, match the complete ordering code and electrical limits. The wide-body package is part of the board insulation design; confirm its dimensions and creepage requirements against the system rather than accepting the generic label SOIC-16.
An ordering code combines the device identity with the fields that define its package, speed, temperature, voltage or packing, depending on the series. The example below shows the field boundaries; read the exact code from the approved BOM before comparing any offer.
ADUM1401CRWZ
Example ordering code from this series
| Field | What it controls |
|---|---|
| Model | ADUM1401 provides three forward channels and one reverse channel in a 16-lead wide-body SOIC. |
| Grade letter | Standard A, B and C grades provide 1, 10 and 90 Mbps. W S and T options provide 1 and 10 Mbps automotive grades. |
| Supply and temperature | Standard grades use 2.7 V to 5.5 V and −40°C to +105°C. W options use 3.0 V to 5.5 V and −40°C to +125°C. |
| Package | RW-16 is the wide-body SOIC-16. Creepage, clearance and the package drawing are part of the insulation review. |
| Packing | -RL identifies tape and reel. Confirm the carrier and quantity; the suffix does not change the pinout or grade. |
These characteristics describe the device family. Exact package, grade and operating-condition limits are provided on each product page and in the manufacturer documents below.
All listed options use the RW-16 wide-body SOIC. The grade changes rate, supply and temperature limits; the package drawing and creepage/clearance requirements still apply to every option.
| Package | Options | Package code | Pins/balls |
|---|---|---|---|
| SOIC-16W | 13 | RW-16 (SOIC_W) | 16 |
Package entries are compiled from the listed ordering codes. Where a device-by-package I/O count is recorded, it appears in the table; a ball or lead count alone does not establish usable I/O or footprint. Confirm the exact package drawing and device pinout.
Compare physical package and variant fields, then open an ordering code for its specifications, packing details and RFQ. All 13 options are listed below.
| Ordering code | Package | Data rate | Supply per side | DC |
|---|---|---|---|---|
| ADUM1401BRWZ | SOIC-16W | 10 Mbps | 2.7 V to 5.5 V | 24+ |
| ADUM1401CRWZ | SOIC-16W | 90 Mbps | 2.7 V to 5.5 V | 24+ |
| ADUM1401WTRWZ-RL | SOIC-16W | 10 Mbps | 3.0 V to 5.5 V | 25+ |
| ADUM1401BRWZ-RL | SOIC-16W | 10 Mbps | 2.7 V to 5.5 V | 24+ |
| ADUM1401ARWZ | SOIC-16W | 1 Mbps | 2.7 V to 5.5 V | 24+ |
| ADUM1401WSRWZ | SOIC-16W | 1 Mbps | 3.0 V to 5.5 V | 25+ |
| ADUM1401ARWZ-RL | SOIC-16W | 1 Mbps | 2.7 V to 5.5 V | 24+ |
| ADUM1401CRWZ-RL | SOIC-16W | 90 Mbps | 2.7 V to 5.5 V | 24+ |
| ADUM1401WSRWZ-RL | SOIC-16W | 1 Mbps | 3.0 V to 5.5 V | 25+ |
| ADUM1401WTRWZ | SOIC-16W | 10 Mbps | 3.0 V to 5.5 V | 25+ |
| ADUM1401CRW | SOIC-16W | 90 Mbps | 2.7 V to 5.5 V | 23+ |
| ADUM1401CRW-RL | SOIC-16W | 90 Mbps | 2.7 V to 5.5 V | 23+ |
| ADUM1401ARW | SOIC-16W | 1 Mbps | 2.7 V to 5.5 V | 23+ |
| Decision | What to match | Purchasing consequence |
|---|---|---|
| Direction split | Map three forward signals and one reverse signal to the intended interface. | A different directional variant changes the circuit connections. |
| Timing and supplies | Check rate, delay and skew at the actual voltage on each side. | A data-rate headline does not establish the timing margin of the connected devices. |
| Wide-body package | Use the RW-16 package drawing and the specified insulation conditions. | A generic 16-lead package label is not a footprint or isolation approval. |
| Automotive option | Select the exact W ordering code where the approved design requires it. | A W option does not qualify every family member or certify the complete system. |
These series support adjacent selection tasks. A related listing is not an approved replacement.
ADI · 12 ordering options
Compare ADuM1200 two-channel isolator data-rate grades, supply ranges, W and EP options, packages and complete ordering codes.
ADI · 14 ordering options
Compare LTC6811-1 and LTC6811-2 isoSPI topologies, temperature grades, 3ZZ options and 48-lead SSOP ordering codes.
Standard A, B and C grades provide 1, 10 and 90 Mbps. Automotive W S and T options provide 1 and 10 Mbps. The required timing margin still needs to be checked for the connected devices.
No. ADuM1401 is specifically three forward and one reverse. A different arrangement changes the circuit connections and requires a schematic and firmware review.
It identifies tape-and-reel packing. The physical package, pinout and electrical grade remain defined by the rest of the ordering code. Confirm the offered carrier and quantity.
No. The W option selects a grade with an automotive temperature range and specified supply limits. It does not by itself establish qualification of the complete system or every family member.